Hobbywing Xerun Justock Combo G3S & 21.5T 2050KV Motor HW38020373

134.95

Artikelnummer: HW38020373

1 op voorraad

Verzend/verpakkingskosten

Bestellingen via internet voor 16.00 uur worden dagelijks op dezelfde dag verzonden

Bestellingen Nederland

Tot €10.00: € 8.95
Van €10.00 tot €35.00: €6.95
Van €35.00 tot €100.00: €3.95
Vanaf € 100.00: Gratis
Bestellingen BE/DE: € 12.50
BE Vanaf € 150 € Gratis
Bestellingen FR: €15.00

This is Hobbywing XR10 Justock JS6 G3S Sensored Brushless ESC w/ 21.5T G2.1 Motor Combo Set. The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions. When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners. One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals. RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world. 

Feature:

 

Fan intelligent start and stop function

  • Freewheeling Feature
  • Built-in polarity protection
  • Multi RPM limit, select as needed
  • Built-in capacitor module, optimized layout
  • Built-in data logging function
  • Wireless connection for data recording and analysis

Specification:

ESC:

  • Continuous Current: 60A
  • Burst Current: 380A
  • Battery: 2S Lipo (Only 2S)
  • Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
  • ESC programming: Independent programming port
  • Motor Supported: Sensor and sensorless brushless motor
  • Motor Limit: 10.5T, or greater,3650 Motor
  • Application: 1/10, 1/12 On-road and Off-road
  • Cooling Fan: Powered by BEC
  • Size: 40.9×33.9×32.1mm (LxWxH)
  • Weight: 75.4g (Including weight of wire)
  • ROAR Approval: Yes

Motor:

  • Scale: 1/10, 1/12
  • Brushless: Yes
  • Sensored: Yes
  • Pole Count: 2
  • LiPo Cells: 2-3S
  • Outer Diameter: 35.9mm (1.413″)
  • Length: 52.5mm (2.067″)
  • Shaft Diameter: 3.17mm (0.125″)
  • Weight: 175g (6.17oz)
  • Timing: Fixed